sigma_10.jpg

A good shot of the rear mount. Some of the same scrap aluminum. It's mounted to a threaded hole on the swing arm. I'm not sure what it's to be used for, side racks for luggage? The brackets has two 90° bends. Once it was mounted I adjusted the distance from the sensor to the magnet by more bending. Don't forget to use blue LocTite on the bolt.

I put some small notches using the jig saw so the zip ties don't slip. The bracket is about an inch or two longer than it needs to be. Once I'm happy I'll trim it to size.

Here are some links that I found useful.

http://www.branfordbike.com/computer/comp9.html
http://www.fjrtech.com/getdbitem.cfm?item=27
http://ip.infinity.nu:8000/vfr/Computer.html
http://www.sport-touring.net/forums/archive/index.php/t-36514.html
http://alan.curvechasers.com/sigma.html (lots of dead links)